LED Hardwax Oil Signature Pack

The lamp, the two base coats in a working quantity, and four colours to put in front of a client. It is the pack for the job where the finish is agreed but the colour is not.

Why these four colours

They are chosen to span the range rather than to sit next to each other. White and Old Grey cover the pale, modern end. English is the mid brown most people picture when they think of an oiled floor. Black is the far end. Show a client those four cured on their own timber and you will usually find the answer is one of them, or clearly between two of them, which is a much easier conversation than a swatch card.

Clear and Invisible underneath

A litre each, so the colour work is not eating into the oil you need for the job itself. Clear darkens the timber slightly and brings out the grain. Invisible holds oak at its raw, just sanded look, and takes a coat of Clear over the top to seal it.

Samples in a minute, on site

The 50W torch runs at 395nm. Brush a shade onto the actual timber, pass the lamp over it, and the sample is cured and ready to handle before the client has finished their tea. Four of those settles a colour decision in one visit instead of three.

Swapping the colours

Tell us which shades you would prefer in the Special Instructions box at checkout and we will pack those instead. The full range is on the LED Hardwax Oils page.

99.4% VOC free

Every colour is 99.4% VOC free, with no solvent smell and nothing meaningful off gassing afterwards, so curing samples in somebody's front room is not a problem.

Mixing your own instead

If you would rather colour match from scratch, the Professionals Pack is built around our LED Colour Pigments.

Weighing Oslek against something else first? We have put it side by side with Osmo, Bona, Rubio Monocoat, Fiddes and Treatex, using each maker's own published data sheets, including where their product is the better buy.