LED Hardwax Oil Essentials Pack
What is in the pack
One 50W Handheld LED Torch, one 1 litre tin of LED Hardwax Oil in Clear and one 1 litre tin in Invisible.
Bought separately those come to £921.60. The pack saves you £225.60, which is the largest saving on any of our smaller packs.
The Essentials Pack is the Starter Pack with the second colour most people end up ordering anyway. Between Clear and Invisible you can cover almost everything a client is likely to ask for on oak, and two litres is enough for a sizeable job rather than a sample.
Clear and Invisible, and when to use each
Clear is translucent. It darkens the timber a little and pulls out the warmth and the grain. Invisible does the opposite: it holds oak at its raw, just sanded look, with none of the amber that most finishes add. We recommend a coat of Clear over the top of Invisible, which seals the surface properly while keeping that pale finish. Having both tins to hand means you are not deciding that on the phone before you have seen the timber.
Cured in seconds, not days
The 50W torch runs at 395nm. Both oils harden the moment it passes over them, so a floor takes foot traffic immediately and a bench can be loaded straight away. Useful on occupied sites, where there is no window to close a room off for two days.
99.4% VOC free
Both colours are 99.4% VOC free. No solvent smell, and nothing meaningful off gassing once the coating is cured, which is why the system gets specified for schools, healthcare settings and lived in homes.
Want colour as well?
The Signature Pack is this pack plus four 250ml colours, and the Taster Pack is the four colours on their own. The full range is on the LED Hardwax Oils page.
Weighing Oslek against something else first? We have put it side by side with Osmo, Bona, Rubio Monocoat, Fiddes and Treatex, using each maker's own published data sheets, including where their product is the better buy.
Pickup currently not available
Pairs well with
The surface coating that dries instantly
Oslek’s LED Hardwax Oil redefines what’s possible in timber coatings, with natural feel, beauty and durability, now with zero dry time. Our cutting-edge LED technology means that our Hardwax Oil dries and cures instantly - at the speed of light, literally.
99.4% VOC Free
Unlike traditional coatings that rely on the evaporation of solvents to dry, our LED Hardwax Oil cures through LED light activation. With almost no solvent to evaporate, there is next to nothing released during curing. The oil is 99.4% VOC free, so there is no lingering solvent smell and no need to keep the room ventilated for days afterwards.
Ideal for indoor environments, sustainable building standards, and applications where air quality is critical, such as Passive Houses, allergy-sensitive homes, and healthcare settings.
Manufactured in Australia
With over 15 years in the timber industry, we understand the importance of a quality, high-performing coating. That's why we manufacture our own coatings in Melbourne, Australia. Everything from R&D and pigment mixing to full scale production happens in house.
Vertical integration isn’t easy, but for us, it’s worth it. It means tighter quality control, reliable performance, and a product we stand behind from start to finish.