LED Hardwax Oil Taster Pack
What is in the pack
Four 250ml tins of LED Hardwax Oil, in Clear, Invisible, English and Black. Bought separately those come to £192.00, so the pack saves you £36.00.
There is no lamp in this pack. Oslek oil does not dry in air, it hardens under a 395nm LED lamp, so you will need the 50W Handheld LED Torch or the 500W Industrial LED Light to use it. If you have not got one yet, start with the Sample Pouch instead, which has a mini torch in it.
Four working quantities of oil, in the four shades that answer most questions. Clear and Invisible are the two we sell most of, English is the mid brown most people picture when they think of an oiled floor, and Black is the far end of the range.
Why sample in 250ml rather than a sachet
A sachet tells you the colour. A 250ml tin lets you brush a shade out across a full board, cure it, and see it in the light of the room it is going into, which is a different question. Oslek oil is a penetrative finish, so the colour comes from the timber as much as from the tin: the same shade reads differently on oak, ash and walnut. At this size you can also finish a small job off the back of it rather than throwing the remainder away.
Swapping the colours
Happy to change any of the four. Tell us which shades you would prefer in the Special Instructions box at checkout and we will pack those instead. The full range is on the LED Hardwax Oils page.
Safe to sample indoors
Every shade in the pack is 99.4% VOC free. There is no solvent smell and nothing meaningful off gassing afterwards, so you can test on a kitchen table rather than in the garage.
Weighing Oslek against something else first? We have put it side by side with Osmo, Bona, Rubio Monocoat, Fiddes and Treatex, using each maker's own published data sheets, including where their product is the better buy.
Pickup currently not available
Pairs well with
The surface coating that dries instantly
Oslek’s LED Hardwax Oil redefines what’s possible in timber coatings, with natural feel, beauty and durability, now with zero dry time. Our cutting-edge LED technology means that our Hardwax Oil dries and cures instantly - at the speed of light, literally.
99.4% VOC Free
Unlike traditional coatings that rely on the evaporation of solvents to dry, our LED Hardwax Oil cures through LED light activation. With almost no solvent to evaporate, there is next to nothing released during curing. The oil is 99.4% VOC free, so there is no lingering solvent smell and no need to keep the room ventilated for days afterwards.
Ideal for indoor environments, sustainable building standards, and applications where air quality is critical, such as Passive Houses, allergy-sensitive homes, and healthcare settings.
Manufactured in Australia
With over 15 years in the timber industry, we understand the importance of a quality, high-performing coating. That's why we manufacture our own coatings in Melbourne, Australia. Everything from R&D and pigment mixing to full scale production happens in house.
Vertical integration isn’t easy, but for us, it’s worth it. It means tighter quality control, reliable performance, and a product we stand behind from start to finish.