LED Hardwax Oil Starter Pack
What is in the pack
One 50W Handheld LED Torch and one 1 litre tin of LED Hardwax Oil in Clear.
Bought separately those come to £759.60. The pack saves you £159.60.
The Starter Pack is the smallest way to own the whole system. The lamp and the oil arrive together, so there is nothing else to buy before you start.
What one litre covers
Enough for 40 to 60 square metres, depending on how thirsty the timber is. That is a decent sized room, a run of stairs, or a handful of furniture pieces.
Hard the moment the lamp passes over
The 50W torch runs at 395nm. Oil goes on, the lamp passes over it, and the surface is ready to take foot traffic or be stacked straight away. No fans, no overnight wait, and no dust settling into a wet finish. It also means you can spot repair a scuff on site in minutes rather than cordoning off a room for two days.
What Clear does to timber
Clear is a translucent oil. It darkens the timber slightly and brings out its warmth and grain rather than sitting on the surface as a film. If you would rather keep oak looking raw and untreated, the Essentials Pack pairs the same torch with Clear and Invisible.
99.4% VOC free
The oil is 99.4% VOC free, which suits schools, healthcare settings, offices and homes that are still being lived in. It has also been tested to EN 71-3, the European toy safety standard, with none of the nineteen regulated elements detected.
Weighing Oslek against something else first? We have put it side by side with Osmo, Bona, Rubio Monocoat, Fiddes and Treatex, using each maker's own published data sheets, including where their product is the better buy.
Pickup currently not available
Pairs well with
The surface coating that dries instantly
Oslek’s LED Hardwax Oil redefines what’s possible in timber coatings, with natural feel, beauty and durability, now with zero dry time. Our cutting-edge LED technology means that our Hardwax Oil dries and cures instantly - at the speed of light, literally.
99.4% VOC Free
Unlike traditional coatings that rely on the evaporation of solvents to dry, our LED Hardwax Oil cures through LED light activation. With almost no solvent to evaporate, there is next to nothing released during curing. The oil is 99.4% VOC free, so there is no lingering solvent smell and no need to keep the room ventilated for days afterwards.
Ideal for indoor environments, sustainable building standards, and applications where air quality is critical, such as Passive Houses, allergy-sensitive homes, and healthcare settings.
Manufactured in Australia
With over 15 years in the timber industry, we understand the importance of a quality, high-performing coating. That's why we manufacture our own coatings in Melbourne, Australia. Everything from R&D and pigment mixing to full scale production happens in house.
Vertical integration isn’t easy, but for us, it’s worth it. It means tighter quality control, reliable performance, and a product we stand behind from start to finish.